10
11
3. Setting the Baby Sound
3.1. Inserting the Batteries
1.
The Receptor and the Transmitter are both powered by 3 AAA batteries.
2.
With a Screwdriver, disassembly the battery compartment cover as diagram and put them according to
the polarity required.
3.
Put the battery compartment cover.
3.2. Transmitter
1.
The Transmitter must be placed at a maximum of 1.5 meters from the baby.
2.
Turn on the product putting the button on the desired channel.
3.
The Indicator Operation Light will turn on.
4.
The Transmitter will capture the baby sound and will transmit it to the Receptor
3.3. Receptor
1.
Turn on the product putting the button on the desired channel.
2.
The Indicator Operation Light will turn on.
3.
Adjust the volume
4.
When receiving a sound transmitter, the Movement Light Indicator will turn on.
ATTENTION: The Receptor and the Transmitter must be tuned on the same channel
The Receptor and the Transmitter need to be at least 1 meter of distance from each
other. Otherwise, howling can happen.
4. Warning
•
The product can not be used by kids as a toy
•
The product is not waterproof. Keep it dry
•
Interference can occur. If that happens, change the channel.
•
Always turn off the product when not using it. In case of a long period without using it, take off the batteries.
5. Problems and Solution
If the product doesn’t turn on, check the items below:
1. Batteries Positioning:
Check if the batteries were placed according to the polarity requested.
2. Battery Level:
Check the Battery Level. The Light Indicator will turn on when the level is low.
3. Channel:
Check it the Transmitter and the Receptor are tuned on the same chanel.
4. Warning / Problems and Solution
3. Setting the Baby Sound
