MULTILANE AT4025, User Manual

Page: 6 / 33

6
Installation
This section address installation and bring-up of the instrument, addressing the following topics:
- System start-up
- Connection guide
System Start-up
To use the DSO under Windows XP, Windows 7 and Vista, it is important that the correct start-up
sequence is followed:

Ensure Microsoft .NET Framework 4.0 is installed

Install the DSO GUI software

Connect the power cable to the AT4000L

Change the IP of the DSO to fit in the network range (Appendix II)

Communication through Ethernet port is required for data acquisition

Connect the PC to the AT4000L through an Ethernet cable, no driver required

Now the DSO is powered up, having the right IP, the Ethernet cable links the instrument to
the PC with the GUI correctly installed

To open the GUI, double click on the software icon located in the Desktop directory

In order to characterize the signals fielding the instrument, check the Data and Connection
configuration
NOTE: This release supports Ethernet connection for the software applications, and the USB port
is used only to configure the device IP Address (note that the IP should be in the same range of the
network)