MultiDyne HUT-APE, User Manual

Page: 18 / 26

7. Panasonic Fiber I/O
Panasonic AK-HC3900 cameras have fiber paths that are reversed from other camera models
supported but the HUT-APE. For correct optical power metering and patching, the fiber connectors
must be moved as shown below. All work should be performed in an ESD-safe environment. Use
caution not to touch any internal components. Do not contact any fiber-optic connector end faces.
Note: Apply medium strength thread locker on screws before closing the enclosure.
Recommended product: Permatex 24010 Medium Strength Thread Locker Blue Gel
1. Unplug the HUT-APE power cable(s) and all connected fibers. Let unit sit for 20 minutes for
internal components to discharge.
2. Remove the eight (8) screws holding the top cover.