MultiDyne HUT-APE, User Manual

Page: 11 / 26

2.2. Rear Panel
F. Fiber Plate
The HUT-APE has multiple fiber I/O options, including ST/UPC, LC/UPC, SC/UPC, or Neutrik
®
opticalCon
®
Duo. By default, it is installed on the rear panel from the factory. The fiber port plate
can be moved to the front panel to conveniently handle various installation requirements. See
the
Moving the Fiber Plate section for details.
G. Lemo
®
SMPTE 304M Plug (FXW.3K.93C)
Power Supply Output. Connect directly to camera or Silverback APE with SMPTE ST311 hybrid
cable.
H. MAIN AC Input
Primary AC power input. If only one power source is available, use this input.
I. BACKUP AC Input
Secondary AC power input. Connect to backup generator or other power source.