background image

Page <6>

V1.0

12/07/22

Newark.com/multicomp-pro
Farnell.com/multicomp-pro
sg.element14.com/b/multicomp-pro

Important Notice :

 This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for 

the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change 

without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, 

any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make 

any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or 

where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its 

negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019.

Auto Power Off 

: Auto shut down after approx. 15 minutes of inactivity.

Operating Temperature 

: 0°C to 40°C (32°F to 104°F)

Operating Humidity 

: 10 to 90% RH

Altitude 

: up to 2000 metres

Storage Temperature 

: -10°C to 60°C (14°F to 140°F)

Storage Humidity 

: 10 to 75% RH

Power Supply 

: One 9V battery, 006P or IEC 6F22 or NEDA 1604

Power Life 

: About 50hrs (Alkaline Battery)

Dimensions 

: 210mm(L) × 55mm(W) × 32mm(H)

Weight 

: 230g (8.11oz) (Including Battery)

Maintenance

Changing the battery

To install or change the 9V battery, open the battery compartment. Replace only with the same type of battery.

Cleaning the casing

Wipe using a damp cloth or sponge. Do not use solvents as these may damage the casing. Do not immerse in water.

            INFORMATION ON WASTE DISPOSAL FOR CONSUMERS OF ELECTRICAL & ELECTRONIC EQUIPMENT
             These symbols indicate that separate collection of Waste Electrical and Electronic Equipment (WEEE) or waste 

batteries is required. Do not dispose of these items with general household waste. Separate for the treatment, 

recovery and recycling of the materials used. Waste batteries can be returned to any waste battery recycling point 

which  are  provided  by  most  battery  retailers.  Contact  your  local  authority  for  details  of  the  battery  and  WEEE 

recycling schemes available in your area.

Made in China. PR2 9PP

Reviews: