Multicomp-Pro
22
1.
Click the
icon, click
Measure
to show the automatic measurement function
menu.
2.
Select
Add
in the bottom menu.
3.
In the left Type menu, select
Period
.
4.
In the right menu, select
Source
as
CH1
.
5.
In the right menu, select
Add
. The period type is added.
6.
In the left Type menu, select
Frequency
.
7.
In the right menu, select
Source
as
CH1
.
8.
In the right menu, select
Add
. The frequency type is added.
The measured value will be displayed at the bottom left of the screen automatically.
How to Use Autoscale
This is a very useful function for first time users to carry out a simple and quick test on the
input signal. The function is applied to follow-up signals automatically even if the signals
change at any time. Autoscale enables the instrument to set up trigger mode, voltage
division and time scale automatically according to the type, amplitude and frequency of
the signals.
E.g.
If you want to measure the signal, you can do as the follows:
1.
Click the
icon, click
Autoscale
to turn on. The function menu will appear.
2.
In the bottom menu, Select
Mode
. In the right menu, select
.
3.
In the bottom menu, Select
Wave
. In the right menu, select
.
