User Manual
61
How to Clone a waveform
You can clone the waveform of one or both channels between two cursors, and save it
in the internal memory or on a USB memory device. You can save four cloned
waveforms in the instrument internal memory. The waveform files saved to a USB
memory device are saved with the extension "ota".
Clone Wave menu
shows as follows:
Menu
Setting
Instruction
Source
CH1
CH2
CH1&CH2
Clone the waveform of CH1
Clone the waveform of CH2
Clone the waveform of CH1 and CH2
Line
a
b
ab
x
Turn the
M
rotary control to move line a.
Turn the
M
rotary control to move line b.
Two cursors are linked. Turn the
M
rotary control to
move the pair of cursors.
Set the cursors to select the entire screen automatically.
Save
Save
Save the waveform between two cursors
Memory
Internal
USB
Select the memory location
To clone waveform and save to the internal/USB memory:
(1)
Push
Save
button.
(2)
Select
Type
in the bottom menu, in the left menu, turn the
M
rotary control to
select
Clone
.
(3)
Select
Source
in the bottom menu, select one channel (
CH1
/
CH2)
or two
channels (
CH1&CH2
) in the right menu for Source.
(4)
Select
Line
in the bottom menu. If
a
or
b
is selected, turn the
M
rotary control to
move the cursor. If
ab
is selected, turn the
M
rotary control to move the pair of
cursors. If
x
is selected, the entire screen will be selected automatically. The
waveform information is displayed at the left bottom corner of the screen.
Length
Frequency
Time
Note
: If "
Out Of Limits
" appears in the information or a message "
Waveform
points beyond the limit.
" appears on the screen, that means the length of the
cloned waveform exceeds the limit. When the source is CH1 or CH2, the
maximum length is 2M; When the source is CH1&CH2, the maximum length is
1M. Push the
Acquire
button, select
Length
in the bottom menu, and set the
record length to a smaller value.