33
Press
[ENTER]
to select the voltage upper limit to be set, press left and right to move the cursor,
and press up and down to set the voltage upper limit. Press
[ENTER]
again to complete.
3. Press the direction key to move the cursor to the lower voltage position.
Press
[ENTER]
to select the voltage lower limit to be set, press left and right to move the cursor,
and press up and down to set the voltage lower limit. Press
[ENTER]
again to complete. Press
[ESC]
to return to the measurement interface.
4.6 Setting the Comparator Buzzer
The buzzer can be enabled in accordance with comparison results when the comparator function is
used. The buzzer can be set to sound in the following states. By default, the buzzer is configured to
sound when the comparison result is WARNING or FAIL.
OFF
The buzzer will not sound regardless of comparison results.
PASS(ON) The buzzer sounds when comparison results are PASS.
FAIL(ON)
The red backlight turns on, along with the buzzer sounds when
comparison results are WARNING or FAIL.
When you press the
[BEEP]
key, the present comparator buzzer setting is displayed. Press the key
repeatedly to cycle through the settings.