TOUCH CENTER
Owner’s manual
4
Important Safety Instructions / Hazard Identification:
Caution
- Only plug the Touch Center into a surge protected power source.
Electrocution Hazard/Fire Hazard
-
Only plug the Touch Center into a power source that is
120v, 60Hz and fused no greater than 15Amps.
Electrocution Hazard
- Do not use the Touch Center near any water source that could come in
contact with the unit or its components.
Electrocution Hazard
- Do not use the Touch Center in a lightning storm or any other condition
that could induce a surge of electricity.
Electrocution Hazard
- Do not alter the electrical cord that is supplied with the Touch Center. Do
not defeat the safety purpose of the grounding-type receptacle. A grounding receptacle has
two blades with one wider than the other and a third grounding prong. The wide blade of the
third prong is provided for your safety. If the provided plug does not fit into your outlet,
consult an electrician for the installation of an appropriate receptacle.
Electrocution Hazard
– Do not plug the Touch Center into a damaged receptacle.
Electrocution Hazard
– Do not plug the Touch Center into a receptacle if the supplied plug is
damaged in any way. Contact customer service if the supplied plug is damaged in any way.
Electrocution Hazard
- Do not stick any conductive materials (such as metals) into the cooling fins
on the back of the unit.
Electrocution Hazard
- Protect the power cord from physical or mechanical abuse. Such as, but not
limited to being walked on, or crushed, or pinched in any way. Never cover the cord with rugs,
mats or any other thing that would hide the location of the cord for someone walking near the
Touch Center.
Electrocution Hazard
- To reduce the risk of electrical shock, do not open the Touch Center access
panels at the rear of the unit.
