MULTI MEASURING INSTRUMENTS MLIT-1 Instruction Manual Download Page 2

SAFETY SUMMARY 

                               

 

                  observe by all means 

 

 

To use this instrument safely, read this " SAFETY SUMMARY " carefully and apply 

the instrument correctly. 

  The CAUTIONs and WARNlNGs which appear on the following pages are stared to 

prevent the operator & other people from the dangers and their properties from the 
damages beforehand. 

   

!

  WARNlNG  :  This symbol indicates the contents " Possibilities of the death 

or the serious wound can be supposed " caused from 
mis-operations.   

    CAUTION    :    This symbol indicates the contents " Possibilities of the injury or 

only the material damage can be supposed" caused from 
mis-operations. 

 

   
 

○ 

OPERATION ENVIRONMENT 

   

!  CAUTION 

 
● 

Do not use or storage this instrument under the condition of direct rays of the 

sun, high temperature & humidity and or condensation, as it may cause the 
deformation and or the isolation defect of the instrument.   

 Do not us this instrument in the environment influenced by acids, alkalis, 

organic solutions. corrosive gas, etc.   

  Do not use or storage this instrument where the mechanical vibration can be 

directly transmitted, as it may cause defect of the instrument.   

● 

Do not use this instrument nearby the appliances which generate strong 
magnetic field and or electrified, as it may cause mis-movement of the 
instrument.  

● 

This instrument does not have the water / dust-proof structure. Do not use this 
instrument in the environment with a lot of dust and drops of water, as it may 
cause defect of the instrument.

   

 
 
 
 
 
 

- 1 - 

 

Summary of Contents for MLIT-1




















Reviews: