5-3) MEMORY FUNCTION
This instrument has memory function and can memorize the measured data and can
display such memorized data in LCD.
(1) How to memorize
Flashing
Memory No.
①
During the measurement of voltage, Io current,
Ior current and or M
Ω
, once press D-HOLD
switch
⑩
.
｢
DH
｣
mark appears on the display
and memory number is flashing.
By pressing ENT switch
⑪
, the data will be
memorized into the flashing memory number.
※
In case of choosing own favorable numbers, decide the number by using UP, DOWN,
RIGHT, LEFT switches (
⑬～⑯
) and then, press ENT switch
⑪
.
※
If you use the memory number which has data already, the old data will be deleted
and the new one will be memorized.
(2) How to see the memorized data on the display (MEMORY ON MODE)
①
Pressing LEFT switch
⑭
and RIGHT switch
⑮
, push POWER switch
⑮
.
②
No. 1 data will be displayed. By using UP, DOWN, RIGHT, LEFT switches
⑬～⑯
,
set the favorable memory number and read the data.
③
To delete the data on the display, press MEMCLR switch. The data will be
disappeared and only the memory number will remain.
④
To terminate MEMORY ON MODE, push POWER switch
⑤
once again.
(3) How to delete all memorized data (MEM ALL CLR MODE)
①
Pressing D-HOLD switch
⑩
and ENT switch
⑪
, push POWER switch
⑤
.
②
Memory number on the display, get incliment and all data will be deleted.
③
Push POWER switch
⑤
once again.
Note
Be careful sufficiently not to delete memorized data mistakenly.
- 16 -
