△
!
WARNING
●
To avoid electrical shock or damage, the measurement is limited to the circuit
under 600V AC.
Such voltages may cause a shock hazard.
●
Never fail to keep the maximum 1000A input to avoid electrical shock or
damage.
●
Never make measurements for uninsulated conductors or bus bars.
4-2. Measurement of Voltage
4-2-1. Measurement of AC Voltage
①
Set the power switch to "ON" position.
②
Connect the plug of red test lead into
the “V” terminal and the plug of black
test lead into the “COM” terminal.
③
Set the range selector switch to “ACV~”
range.
④
Contact the tips of the test leads to the
circuit under test.
⑤
Read the voltage value in the display.
4-2-2. Measurement of DC Voltage
①
Set the power switch to "ON" position.
②
Connect the plug of red test lead into the “V” terminal and the plug of black test
lead into the “COM” terminal.
③
Set the range selector switch to “DCV …” range.
④
Contact the tips of the test leads to the circuit under test.
⑤
Read the voltage value in the display.
