MULTI MEASURING INSTRUMENTS M-2010 Instruction Manual Download Page 8

7. MAINTENANCE 
   

 

When making requests for repair service, please bring the instrument directly to the 

    dealer. If this is impossible, however, send the instrument directly to our sales office. 

    When mailing this instrument, always pack it in its original or equivalent packing       
    material and pack together with name, address, telephone number and the warranty 

  documentation. 

 

● 

To ensure speedy and reliable repair, always include information as the type of 

failure and cause. 

● 

If required, always return accessories with the instrument. 

● 

When contacting us, provide the model number and serial number of your 

instrument. 

       
 
       
                                                                                                                                                                                                   
                                                                                                                                                                                                   

Summary of Contents for M-2010









Reviews: