MULTI MEASURING INSTRUMENTS M-2010 Instruction Manual Download Page 1

 

AC CURRENT 

DIGITAL CLAMP-ON TESTER 

 

MODEL  M-2010 

 

INSTRUCTION MANUAL 

 

 

              Thank you very much for selecting our digital AC clamp-on  
                            tester. 
                            This model is complex instrument and employ a very reliable 
              mechanical/electronic design. 
                               

  Before you use your new instrument, read this Instruction 

              Manual completely and familiarize yourself thoroughly with   
              all functions. With proper use and care, your tester will give 
              you years of satisfactory service.      
 
                               
 
 
 
 
 
                                    MULTI MEASURING INSTRUMENTS CO.,LTD. 
                  Akihabara Murai Bldg. 7F, 1-26 Kanda Sakuma-cho, 
                  Chiyoda-ku, Tokyo, Japan, 101-0025 
                  TEL : +81-3-3251-7013  FAX : +81-3-3253-4278 
                                    Home Page : 

http://www.mutimic.com/

 

                                    E-mail : 

[email protected]

 

 
 

Summary of Contents for M-2010









Reviews: