MULTI MEASURING INSTRUMENTS M-140HC Instruction Manual Download Page 10

 

4. REPAIR SERVICE 

When requesting for repair service, please bring the instrument directly to the dealer where 

you bought. 

When mailing the instrument, always pack it in its original or equivalent packing materials to 

avoid any damage during the transportation and also put together with documents showing 

your name, address, phone number and defect point. 

 

5. WARRANTY 

This instrument is sent out from our factory after the sufficient internal inspections but if you 

find any defect due to the fault in our workmanship or the original parts, please contact the 

dealer where you bought the instrument. 

 

The warranty period is 12 months from the date of purchase and the instrument shall be 

repaired at free of charge, provided that we judge the cause of defect is obviously resulted 

from our responsibility. 

 

GURANTEE REGULATIONS 

1.  This instrument is warranted for the operation under normal use for 12 months from the 

date of purchase. 

2.  This warranty does not cover the following defects: 

a. Defect caused from the improper use and operation. 

b. Defect caused from the use, operation and storage beyond the original specifications, 

designs and conditions. 

c. Defect caused from the renovations or repairs done by someone else than us or our 

representatives. 

d. Defect not caused from our responsibilities.

 

Summary of Contents for M-140HC











Reviews: