SAFETY SUMMARY
observe by all means
●
To use this instrument safely, reed this “SAFETY SUMMARY” carefully and
apply the instrument correctly.
●
The CAUTIONs and WARNINGs which appear on the following pages are
stated to prevent the operator & other people from the dangers and their
properties from the damages beforehand.
△
！
WARNING : This symbol indicates the contents "Possibilities of the death or
the serious wound can be supposed" caused from mis-operations.
△
！
CAUTION : This symbol indicates the contents "Possibilities of the injury or
only the material damage can be supposed" caused from mis-
operations.
△
！
WARNING
POSSIBLE ELECTRICAL SHOCK
●
This instrument is for the use of low voltage circuit.
●
Do not make measurements of power lines carrying more than AC/DC 600V.
Before use, check and confirm the voltage of circuit to be measured.
●
Apply only the coated cables and do not clamp the bare cables.
POSSIBLE ELECTRICAL SHOCK OR ACCIDENT
●
Do not handle the instrument in the rain, at humid place, with a drop of water
and or with wet hands.
●
Do not use the instrument if the CT or CT case are damaged and if the battery
cover is off, do not operate this instrument.
●
Do not give the shock to tip of CT.
●
Do not disassemble this instrument.
●
Definitely avoid apply this instrument to voltage measurement of the power line
carrying more than 250V for safety.
●
Replace the batteries after took off test probe, etc. from the circuit.
POSSIBLE INSTRUMENT BROKEN
●
At the range of resistance measurement, do not apply voltage to the tips of probes.
It may cause the defect of instrument.
