*
For AC/DC current ranges, it takes approx. 20 seconds after power-on to get the
stable display.
*
In case of the continuous measurement of DC current for long time, the “0” point may
change by surrounding temperature and or by magnetization of CT. It may cause
inaccurate measurement.
*
In case of measuring DC current, the display value may not return to “0.0” after
measurement due to CT magnetization.
Before measurement, make “0” adjustment each time and
△
mark will be displayed.
The 40A range is high sensitive and the last digit may get unstable but it is not
abnormal.
△
！
WARNING
POSSIBLE ELECTRICAL SHOCK
●
Test probes are consumption articles. Confirm that there are no damage at
the insulate coat part of probes. If you find any unusualness, stop the use
instantly and repair or replace the probes.
POSSIBLE FIRE HAZARD, BURN
●
Connect test probes firmly. In case of mis-connection, it may cause spark.
△
！
CAUTION
POSSIBLE DAMAGE
●
At the measurement of resistance, it may cause the damage to the inside of
instrument if applying voltage mistakenly.
