Muller licht Petunia 404040B, Instruction Manual

Page: 37 / 44

37 COMMISSIONING
COMMISSIONING
For integration in a Smart Home gateway/app, the light must be reset, see
„Resetting the tint product“. This initially clears the connection to the tint
remote control.
Each light can be activated separately. For this reason, each light must be con-
nected separately and one-by-one to the tint remote control. Depending on the
existing app, all 3 lights may also be incorporated at the same time when the
Zigbee gateway is used.
If you have a tint remote control:
Each time, only connect the light that you would like to connect to the distribution
wire and during this time disconnect the connections to each of the other lights.
1. Plug in the net plugs and I or turn the home security back on and set the corre-
sponding lamp switch to 1 or ON.
2. Prepare the remote control/sensor according to the manual for connecting and
keep it correspondingly close to the bulb.
3. The lamp is connected when it lights up 3x.
4. A separate connection procedure must be carried out for each tint light.
If you would like to activate the lights separately, in order to set different
colors, for example, assign each of them to their own group on the tint
remote control. If all lights are to be activated at the same time, assign all
lights to the same group.
If you have a Zigbee Gateway (e.g. Hue Bridge V2, Amazon Echo Plus *, Lightify
Gateway):
1. Start the search in the corresponding app.
2. Only now switch on the tint product (in pairing mode), even if this is specified
differently in the app.