4
Mounting and installation
Using two displays
16
V9.20191001
31302713-02-US
4.
You can remove the card.
5.
To lock the card again, press the card lightly into the slot until it is locked again.
6.
Screw the cover back onto the rear of the display.
Using two displays
The following table will tell you which settings you need to configure to be able to use two displays,
and the chapters in which these are described. The specifications on the in-cab displays are without
liability.
Settings for TRACK-Guide and the in-cab display
Possible purpose
TRACK-Guide settings
Setting of the in-cab display
TRACK-Leader and SECTION-Control on
the ME display.
Operation of the job computer on the in-
cab display.
Activate the ISOBUS display (JohnDeere:
Implement Bus; Fendt: Fendt ISOBUS
display).
Deactivate Task Controller (JohnDeere:
Task Controller; Fendt: Taskcontroller).
TRACK-Leader, SECTION-Control, and
job computer operation on the ME display.
Login as ISOBUS display: Yes [
The ISOBUS display licence is required.
Deactivate the ISOBUS display
(JohnDeere: Implement Bus; Fendt: Fendt
ISOBUS display).
Deactivate Task Controller (JohnDeere:
Task Controller; Fendt: Taskcontroller).
For JohnDeere, also deactivate:
Greenstar, Original GreenStar Monitor
4.5
