background image

  

For your safety 

Basic safety instructions 

 

  

  

3032257601-02-EN  

  

 

For your safety 

 

Basic safety instructions 

Carefully read the following safety instructions before installing the basic vehicle harness. 
 

  Only install the product if you are specially trained in the field of electronics. In all other cases, 

have the work performed by a specialist. 

 

  Install the product as described in these instructions. 

 

  Replace defective fuses only with fuses with the same amperage. 

 

Intended use 

The product is only intended for use in the agricultural sector. The manufacturer is not liable for any 
other installation or use of the product. 

The manufacturer cannot be held liable for any personal injury or property damage resulting from 
such non-compliance. All risk arising from improper use lies with the user. 

Intended use also includes compliance with the conditions for operation and repairs prescribed by the 
manufacturer. 

All applicable accident prevention regulations and all other generally recognized safety, industrial, 
and medical standards as well as all road traffic laws must be observed. Any unauthorized 
modifications made to the equipment will void the manufacturer's warranty. 

 

Layout and meaning of warnings 

All safety instructions found in these Operating Instructions are composed in accordance with the 
following pattern: 

  

 

 

WARNING 

This signal word identifies medium-risk hazards, which could potentially cause death or serious 
physical injury, if not avoided. 

 

  

 

 

CAUTION 

This signal word identifies hazards that could potentially cause minor or moderate physical injury or 
damage to property, if not avoided. 

 

  

 

NOTICE 

This signal word identifies hazards that could potentially cause damage to property, if not avoided. 

 

1.1 

  

 

1.2 

1.3 

Summary of Contents for SMART-CPC










Reviews: