Mul-t-lock KC5, User'S Operation Manual

Page: 19 / 100

– 18 –
4. Packing and
Transporting
4.1. Safety Notes for Lifting and Transport
WARNING
The manufacturer bears no responsibility for any damage to objects or persons caused
by non-compliance with the applicable safety standards in force relating to the lifting and
movement of material within the user’s factory.
Machine transfer and truck loading must only be carried out with the appropriate equipment as
described in the Packing & Transporting section.
Always act with extreme care to prevent personal injury or damage to the machine or its
individual parts.
Personnel must keep clear from the suspended load and, in any case, keep out work areas
where cranes, forklift trucks, and other lifting/handling equipment are in use.
The transit lanes inside the factory where the machine is to be installed must be kept clear.
The floor must be kept clean and free from any obstacles, which might make the forklift truck or
crane to “jump”.
The load must always be securely fixed to a load-bearing part of the lifting and transport
equipment, thus preventing any movement whatever the cause.