background image

 

T  H  E     W  O  R  L  D     P  O  W  E  R     I  N     A  N  C  H  O  R  I  N  G     S  Y  S  T  E  M  S 

 

Warranty 

Limited for period of Three years (First Owner) 

 

We warrant each new product manufactured by us to be free from defects in material and workmanship for a period of 3 

years (first Owner). 

This warranty shall become effective only upon receipt of a completed warranty registration, which shall identify the 

product so registered by serial number.  This warranty shall remain in effect for a period of three (3) years from the date of 
purchase.  For vessels in charter or hire the warranty is one (1) year due to various operators and overloading which may 
occur. 

 

Conditions 
While this warranty applies to defects in material and workmanship, it does not apply to: 

• 

Normal worn parts or to damage caused by neglect, lack of maintenance, accident or improper service/installation 
or service by persons other than an authorised Muir representative. 

• 

Muir shall not be responsible for failures due to products being used in applications that they are not intended for, or 
exceed the products performance specifications. 

• 

For warranty claim, defective product must be returned to Muir for inspection. 

• 

Muir will not be responsible for freight charges, removal or installation labour on warranty claims. 

• 

Damage due to unsatisfactory storage or use of equipment prior to installation in the approved/intended manner. 

 

Exclusions 
Warranty is limited to twelve months for: 
• 

Electric motors / controls / equipment 

• 

Hydraulic pumps / controls / valves 

• Weather 

seals 

• 

Use on charter/hire/commercial boats 

 

All incidental and/or consequential damages are excluded from this warranty.  Warranties of merchantability and fitness 

are excluded from this warranty.  Implied warranties are limited to the life of this warranty.  Some countries do not allow 
limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so 
the above may not apply to you. 

We reserve the right to improve the design or materials used on any product without assuming any obligation to modify any 

product previously manufactured or used. 

 

Liability 
Muir Engineering liability under this warranty shall be to the exclusion of all other warranties or liabilities (to the extent 

permitted bylaw). In particular (but without limitation): 

Muir Engineering shall not be liable for: 
Any indirect or consequential loss including (without limitation) any loss of anticipated profits, damage to reputation or 

goodwill, loss of expected future business, damages, costs or expenses payable to any third party or any other indirect 
losses. Any damage to yachts or equipment. Death or personal Injury (unless caused by Muir Engineering negligence). 

 

 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

 

WARRANTY REGISTRATION CARD 

 

Return To 
MUIR ENGINEERING PTY. LTD. 

100 Browns Rd, Kingston 
Tasmania, Australia, 7050 

 

Customer Name : 

 Address / Contact : 

 Date of Purchase : 

Winch Model : 

Serial No : 

 Supplier Name : 

 Address : 

 

www.muir.com.au

 12 

HR700-HFF700   12/01/2015

muir.com.au

18

Summary of Contents for HFF 700





















Reviews: