9
EN: STEAM MOP 12IN1 |
Instruction Manual
Due to the high mineral water content in certain areas, you may notice less steam from the accessories; this may be caused by
calcium build-up inside the nozzle.
CLEANING CALCIUM BUILDUP
1.
It is recommended to use the vinegar solution inside the affected accessory then fill the water tank with water according to
the directions and run a continuous jet of steam through the affected accessory for several minutes to clear the pathway.
2.
Aim the appliance at a neutral surface or cleaning cloth to ensure do debris is emitted.
CLEANING THE MICROFIBRE CLOTHS
1.
The microfiber cloths are machine washable on a warm setting; always use a mild detergent.
2.
For best results, lay flat to dry.
NOTE:
Never use bleach or fabric softener when cleaning the microfiber cloths.
STORAGE
1.
After use, turn the appliance off and unplug from the mains power supply.
2.
Remove the water tank and empty out any residual water, then clean the outer surface with a dry cloth.
3.
Remove the cleaning pad and wash ready for the next use.
4.
Store the appliance in a dry area out of reach of children.
TROUBLESHOOTING
Problem
Possible Reason
Possible Solution
Reduced Steam or No Steam.
Water tank may be empty.
Steam nozzle may be blocked.
There is no power to the unit.
The steam button wasn’t pressed.
Steam control knob is set to min.
Fill the water tank.
Clean the steam nozzle.
Ensure the appliance is plugged in.
Press the steam button.
Turn the steam control knob clockwise
to Max.
Unit Will Not Turn On.
Blown fuse or breaker.
Power cord not plugged in.
Internal fuse is blown.
Handle is not inserted correctly.
Replace the fuse or reset breaker.
Plug the cord into a working circuit.
Contact customer services.
Check that the handle is firmly
connected to the steam mop body.