10
INSTALLATION, USE AND MAINTENANCE MANUAL
HOW TO USE YOUR OVEN
Turning on the burner
The
Piccolo 60/75
utilizes a
standing pilot flame
to light the oven burner. Look inside the oven to
familiarize yourself with the burner tube and pilot light assembly. This
pilot light
will need to be lit for
the burner to operate and should stay lit for your entire cooking process.
Lighting the pilot flame
1.
Open the gas shut-off valve slowly. Keep turning until the valve is fully open.
2.
Locate the black control box. The triangle at the base of the yellow DRAGO logo is the alignment
index and points to the flame setting on the control dial.
3.
Locate the red spark button in the upper left hand corner. Pressing this button will create the
spark to light the pilot flame.
4.
Locate the round black control dial with four settings:
a.
Black circle = Off
b.
Star Symbol = Pilot Light
c.
Large Flame = High Flame (maximum power setting)
d.
Small Flame = Low Flame (minimum power setting)
NOTE:
You must push the dial inwards in order to change settings. Push the dial in (which
opens the gas valve) and turn to the appropriate setting.
5.
Press the control dial in, hold and rotate until the star symbol is aligned with the triangle.
Simultaneously, press the red button to create a spark. This will light the pilot light.
NOTE
: The first time you light the pilot may take a few minutes. The gas from the tank will need
to push all of the air out of the line before the gas can reach the spark and light.
6.
Release the red spark button once the pilot flame is established. The entire pilot flame must light
with all three small flames showing. Repeat step 5 if the pilot does not stay lit. Once the pilot
flame is stable, you are able to turn the dial to the High or Low setting.
