14
Instrument Panel Cont.
11. Windshield Wiper Switch:
Only applicable on Mudd-Ox’s equipped with a windshield wiper. There is both a High and Low setting. High moves
the blade quickly, while Low moves it slower. Select setting based on weather conditions and visibility.
12. Winch Switch:
Controls the direction of the winch motor. The “OUT” position will unreel the cable away from the Mudd-Ox, while “IN
will reel the cable towards the Mudd-Ox.
13. MIL Light
: Malfunction Indicator Light. See page 39 and manufacturer’s engine manual for additional information.
14. Ignition Switch:
When the key is installed, it will toggle the engine on and off. Turn completely clockwise to start engine, release once started.
Turn completely counterclockwise to shut off engine. (If the engine fails to start after 10 seconds, turn off the key for 5 to 30 seconds and then
try again).
See manufacturer’s engine manual for additional information.
15. MIL Fuse:
Fuse holder for MIL light. See page 39 and manufacturer’s engine manual for additional information.
16. Hydraulic Oil Temp Left Gauge:
The oil gauge monitors hydraulic oil temperature, and must not exceed 180 degrees Fahrenheit. If the tem-
perature exceeds 180 degrees, immediately shut off machine and let it cool down.
17. Hydraulic Oil Temp Right Gauge:
Same as #16 but for right side tank.
18. Twist Throttle:
For easy of driving, the Fort Mac is designed with a twist throttle system. Once the engine is started, simply turn the throttle
counterclockwise for higher RPM, and the clockwise for lower RPM. Pushing in the knob returns throttle to neutral position.
19. USB Ports:
Under the weatherproof cover are (2) 12V USB ports. These may be used to power accessories such as a cell phone.
20. Cigarette Lighter Port:
Under the weatherproof cover is a 12V cigarette light port. This may be used to power accessories such as a cell phone.
Summary of Contents for FORT MAC 85 HP
