MUCHMORE RACING warrants their Cell Master Double Accel to be free from defects in material and workmanship for a period of 120 days from
the date of purchase MUCHMORE RACING (or their associated distributors) will repair or replace without charge or refund the purchase price of
any product which fails during the warranty period by reason of defect in material or workmanship found upon examination by MUCHMORE RACING
to have been the cause of failure.
This warranty does not cover any failures attributable to abuse, mishandling, failure to follow operating instruction, alteration or accident, result of
normal wear, misuse or improper maintenance.
■
Explosion and Fire
■
The case damage
■
Damage to electronic components and circuit boards
■
A circuit board soldering
■
To receive warranty service, the product of all the parts before the first check and troubleshooting instructions.
■
To obtain warranty service on products purchased on the receipt of the products you need.
(If you do not have a receipt, the warranty period is not to be recognized.)
■
For faster delivery failure or defect repairs and for more information, please fill out the address and contact details
Product Warranty
Muchmore Racing. Co., Ltd.
502-17 Baengma-ro, ilsandong-gu, Goyang-city, Gyeonggi-do, 410-842, Rep. of KOREA
Tel
+82-31-903-0487 |
Fax
+82-31-903-0497
http://www.muchmoreracing.net
Temp Unit
Change the Notation of Celsius and Fahrenheit.
- Temp Unit -
C /F
Battery End Temp
Using a temperature sensor mounted on left / right of the 3-pin port, stop charge and discharge when the
temperature reaches the set temperature.
Protect the battery from over charging/discharging.
※
Valid set temperature: 40
℃
~55
℃
(104
℉
~131
℉
)
* This function needs an option part. (Extra buying)
MR-DATS Cell Master Double Accel Micro Temp Sensor
Battery End Temp
40C
Power current
Power unit is lower than the setting value, the input power apparatus stops.
- Power Current -
10.0A - 25,0A
Power Voltage
In case of using car battery to input power, avoid over-charging function.
Power unit is lower than the setting value, the input power apparatus stops.
- Power Voltage -
10.0V - 12.0V
Safety timer
When the set time is exceeded, quit operation by force. Prevent errors due to the excessive charge and
discharge. If the set time is too short, during the process of charging and discharging operations can be
terminated. Set the charge and discharge time longer than usual.
Ex) Charge 2000mA 1A expecting time : 120minutes x 1.3(about 30% add) = 156minutes.
(30-250Min, 10Level)
- Safety timer -
120Min
10
Muchmore Racing Co., Ltd.
SUPER COMPACT DUAL PORT CHARGER/DISCHARGER
Summary of Contents for cell master double accel MM-CTXDAB
Page 32: ...www muchmoreracing net ...
