Muchmore cell master double accel MM-CTXDAB, User Manual

Page: 10 / 32

*Optional discharging function key
During the discharge, press button shown 3 information on the
screen. If not press the button, it moves back to discharging mode screen
after 5 seconds.
1. Setting value capacity, Discharging cut Volt value
2. End Temp(End charging temperature), BAT Temp(battery temperature)
3. EQU Temp(device temperature), AVG Voltage
●
Discharge Pb(lead) battery
Pb
DCH 8.35V
8:11
1.0A
122mA
Battery type/
Cell num, Channel
Discharging currents Battery voltage
Mode state Discharging capacity Discharging time
● Display after the end of the discharge
Pb
End1 6.20V
58:02 0.0A
2800mA
Battery type Battery voltage
Finish Discharging capacity Discharging time
* Check the internal resistance of cell and voltage.
You can see the information on your screen push the button.
1. Check resistance value (Press the button, detect the resistance and
show on the screen, it need to 5~7 seconds to detect)
Volt Meter
Select the Volt meter
-select menu 1-
Volt Meter
Volt Meter is function to check each cell voltage and total voltage of LiPo and LiFe.
It is very useful to detect difference of each cell, total voltage, condition of charging/discharging.
* Quik Volt Meter: Push the ESC button at least 3 seconds in main menu, it moves Volt Meter mode
Each cell present voltage
4.18
4.18 4.19
4.19 4.19
4.19
Total voltage
BAT Total Volt
25.12
USER SETTING
Main menu On/Off
This is function of customizing; you can make user’s memory. Put your battery and setting on/off function.
*Use the button, memorized current function On or Off.
Apply menu (LiPo, LiFe, NiCd/NiMh, Pb(lead), Volt Meter)
LiPo On/Off
Main menu On/Off
Key tones
Sonds on/off
- Key tones-
On / Off
Key timer
Set a ring buzzer time when error, finishing charge/discharge.
If set off, it just indicate LED without sounds.
Set Forever, it rings till push the button.
Setting mode - Off, 5sec, 15sec, 30sec, Forever
- Key timer -
5sec
-select menu 1-
User Setting
Select User Setting.
When you click the , changed to page.
● Cancel Discharging
Press the button for 2 seconds during the discharging, stops discharging, and the status of CHG (channel), End (channel) messages are
shown on the intersection. At this point, press the button to proceed the Setup screen.
9 Muchmore Racing Co., Ltd. SUPER COMPACT DUAL PORT CHARGER/DISCHARGER