MU columbia aqua FC-550, Manual

Page: 19 / 24

19
INFORMATION ON THE USE OF THE EQUIPMENT:
Origin of the water to be treated:
PUBLIC SUPPLY NETWORK
OTHER
* Pre-treatment of the equipment:
* Hardness of entry to the equipment (ºF):
* TDS of entry to the equipment (ppm):
* TDS produced water (ppm):
Inlet pressure to the equipment (bar):
INSTALLATION STEP CONTROL:
Pre-filter assembly: Installation of isolation by-pass:
Overflow installation: Correct drainage installation:
Start-up according to protocol: Brine suction test/tank filling:
Checking of fittings: Leakage of the pressurised system:
Measurement of inlet hardness: Programming of the equipment:
Output hardness measurement: Adjustment of residual hardness:
COMMENTS
* Result of installation and commissioning:
CORRECT (equipment installed and working correctly. Produced water suitable for the application).
OTHER:
IDENTIFICATION OF THE AUTHORISED TECHNICIAN/INSTALLER: CONFORMITY OF THE OWNER OF THE EQUIPMENT:
*Ref: Maintenance contract:
ACCEPTS the maintenance contract
DOES NOT ACCEPT the maintenance contract
Model/Ref:
Owner:
Street
Telephone:
City:
Province: C.P.:
14. INSTALLATION REGISTER SHEET
NOTES TO THE TECHNICIAN/INSTALLER: read this manual carefully. If in doubt, contact your dealer’s Technical
Support Service (T.A.S.). The data marked with the symbol * must be filled in by the technician/installer and trans-
cribed by him/herself to the WARRANTY page. This sheet must be kept by the installer and may be requested by
the distributor in order to improve after-sales service and customer service. The technician who performs the
installation and commissioning of the equipment must have adequate technical training.
COMPANY AND/OR AUTHORIZED INSTALLER, DATE AND SIGNATURE:
I have been clearly informed of the use, operation and
maintenance required by the installed equipment, having
been offered a maintenance contract and informed of how
to contact a customer service in the event of a request for
information, communication of a breakdown or malfunction,
request for maintenance or intervention by a technician.
EQUIPMENT WARRANTY DIRECTED TO THE DISTRIBUTOR:
The distributor will only be responsible for the replace-
ment of parts in the event of non-conformity. The repair
of the equipment and the costs involved (labour, shipping
costs, travel, etc.) will be borne by the distributor, in ac-
cordance with the general conditions of contract and sale,
so it can not be passed on later to the manufacturer.
Remarks:
SERIAL NUMBER