8.4 Crankcase Breather
8.4.1 Crankcase breather – Cleaning oil pre-separator element
Preconditions
☑
Engine is stopped and starting disabled.
WARNING
Fuels are combustible and explosive.
Risk of fire and explosion!
• Avoid open flames, electrical sparks and ignition sources.
• Do not smoke.
• Wear protective clothing, protective gloves, and safety glasses / facial protection.
WARNING
Compressed air gun ejects a jet of pressurized air.
Risk of injury to eyes and damage to hearing, risk of rupturing internal organs!
• Never direct air jet at people.
• Always wear safety goggles/face mask and ear defenders.
Crankcase breather, cleaning oil
pre-separator element
1.
Undo clamp (2).
2.
Remove hose (1) and clamp (2) from cov-
er (3).
3.
Slacken screws (4).
4.
Remove screws (4) and washers (5).
5.
Remove cover (3), gasket (6), oil pre-separa-
tor (7) and gasket (8).
6.
Wash oil pre-separator element (7) and cov-
er (3) in fuel and blow out with compressed
air.
7.
Moisten oil pre-separator element (7) with
engine oil.
8.
Insert gasket (8) and oil pre-separator ele-
ment (7) with new gasket (6).
9.
Place cover (3) in position and tighten screws
(4) and washers (4).
10.
Place clamp (2) and hose (1) on cover (3).
11.
Tighten clamp (2).
12.
Clean other oil pre-separator elements in the
same way.
MS150063/03E 2016-02
| Crankcase Breather | 73
TIM-ID: 0000032230 - 003
