The fault code (1) comprises three digits.
Fault messages can also be caused by faulty sensors/actuators. Contact Service to have sensors/actuators
checked and replaced as necessary if the troubleshooting measures listed in the table below prove unsuc-
cessful.
IMPORTANT NOTE:
The information provided in the columns “Meaning” and “Action” applies to the standard default state of the
genset on delivery. Differing system responses requiring different action may result when settings are
changed by the OEM. The OEM is responsible for documenting any changes and defining appropriate coun-
teraction.
The table below lists possible fault codes:
Fault
code no.
Full designation
Meaning
Action
Setting parame-
ter no.
003
HI T-Fuel
Prewarning: Fuel tempera-
ture too high (limit value 1,
alarm configuration parame-
ter, see PR 2.8008.100 for
explanation).
Check tank temper-
ature, contact Serv-
ice if no fault detect-
ed.
2.0122931
004
SS T-Fuel
Main warning: Fuel tempera-
ture too high (limit value 2,
alarm configuration parame-
ter, see PR 2.8008.100 for
explanation).
Check tank temper-
ature, contact Serv-
ice if no fault detect-
ed.
2.0122932
005
HI T-Charge Air
Prewarning: Charge-air tem-
perature too high (limit value
1, alarm configuration pa-
rameter, see PR 2.8008.100
for explanation).
Check cooler, check
intercooler, contact
Service if no fault
detected.
2.0121.931
MS15018/03E 2016-02
| Troubleshooting | 45
TIM-ID: 0000008508 - 003
