1.3 Transport
Transport
Use only the lifting eyes provided to lift the engine.
Only use transport and lifting devices approved by MTU.
Take the engine's center of gravity into account.
Transport the engine in the installation position only, max. permissible diagonal pull 10°.
In the case of special packaging with aluminum foil, suspend the engine by the lifting eyes of the trans-
port pallet or transport with equipment suitable for heavy loads (forklift truck).
Install the crankshaft locking device and the locking screws for the engine mounts prior to engine trans-
portation.
Secure the engine against tilting during transportation. The engine must be additionally secured against
slipping or tilting when going up or down inclines and ramps.
Setting down the engine following transportation
Set the engine down on a firm, level surface only.
Make sure that the consistency and load-bearing capacity of the ground or support surface is adequate.
Never set an engine down on the oil pan unless expressively authorized to do so by MTU on a case-to-
case basis .
MS150119/00E 2014-08
| Safety | 7
TIM-ID: 0000002622 - 006
