MTS Systems Temposonics MH Series, Installation Manual

Page: 8 / 36

I 8 I
Temposonics
®
MH Series
Installation Manual
3.5.3 Installing the magnet
M Magnet
Description 401 032 400 533 201 542-2
Ø Borehole diameter 17.5
+0.1
25.5
+ 0.1
33
+ 0.1
d Depth
1 Distant washer
2 Distant washers
13.0
+ 0.1
18.0
+ 0.1
S Distant washer
OD x 5 x 13,3
17.4
+0.1
25.4
+ 0.1
33.0
+ 0.1
M Magnet 17.4 x 8 x 13.5 25.4 x 8 x 13.5 33.0 x 8 x 13.5
W Corrugated washer OD: 16.5 - 17.4
ID: 13.5 - 14
OD: 24.5 - 25.4
ID: 13.5 - 14
4 x M4
1 Nm
C Circlip
DIN 472 - 18 x 1 25 x 1
4 x M4
1 Nm
3.6 Safety screw to DIN 913
For MH and MT sensors, an M5x10 set screw to DIN 913 with flat point should be used. This safety screw is only required for blocking the sensor
housing in axial direction and needs to butt only against the groove, i.e. the screw may be tightened only with a max. torque of
0.5 Nm to prevent
damaging the sensor. The set screw should be inserted with a resolvable safety adhesive, e.g. Loctite blue .
All dimensions in mm
4.5 4
45
°
4.5
8.5
1
Detail housing
Detail safety screw