1
1. Introduction
1.1
Intended Use
The OX-700 is intended to be used for measuring,
displaying and storing of oxygen saturation (SpO
2
)
，
pulse rate (PR) and motion in home or a healthcare
facilities environment. The App can show real-time SpO
2
,
pulse rate and waveform, display results and share
reports.
The data and results provided by this device are for pre-
check screening purpose only and cannot be directly
used for diagnostic or medical treatment.
Warnings and Cautionary Advices
·
DO NOT squeeze the sensor or apply excessive force on the sensor &
cable.
Ÿ
Do not use this device during MRI examination.
Ÿ
Never submerge the device in water or other liquids. Do not clean the
device with acetone or other volatile solutions.
Ÿ
Do not place this device in pressure vessels or gas sterilization device.
Ÿ
Consult your doctor immediately if you experience symptoms that could
indicate acute disease.
Ÿ
Do not self-diagnose or self-medicate on the basis of this device without
consulting your doctor. In particular, do not start taking any new
medication or change the type and/or dosage of any existing medication
without prior approval.
Ÿ
Use only cables, sensors and other accessories specified in this manual.
Ÿ
Prolonged continuous SpO
2
monitoring may increase the risk of
undesirable changes in skin characteristics, such as irritation, reddening,
blistering or burns.
Ÿ
Check the SpO
2
sensor application site every 6-8 hours to determine the
positioning of the sensor and the circulation and skin sensitivity of the
patient. Patient sensitivity varies depending on medical status or skin
condition. For patients with poor peripheral blood circulation or sensitive
