TempoLink Smart Assistant
Operation Manual
I
4
I
2.1 Intended use
This product may be used only for the applications defined
under item 1 and item 2 and only in conjunction with the
third-party devices and components recommended or
approved by MTS Sensors. As a prerequisite of proper
and safe operation, the product requires correct transport,
storage, mounting and commissioning and must be operated
with utmost care.
1. The sensor systems of all Temposonics
®
series are
intended exclu sively for measurement tasks encountered
in industrial, commercial and laboratory applications. The
sensors are considered as system accessories and must
be connected to suitable evaluation electron ics, e.g. a
PLC, IPC, indicator or other electronic control unit.
2. TempoLink smart assistant is an accessory for
Temposonics R-Series
V
sensors for reading out and
adjusting of sensor parameters as well as monitoring
status values.
2.2 Foreseeable misuse
2. Safety instructions
Do not alter the sensor assistant.
The sensor assistant might be damaged.
Do not step on the sensor assistant.
The sensor assistant might be damaged.
Foreseeable misuse
Consequence
Wrong sensor connection
The sensor and TempoLink smart
assistant will not work
properly or can be damaged
Power supply is out of the defined
range
The TempoLink smart assistant
can be damaged
Cables are damaged
Short circuit – the sensor and
TempoLink smart assistant can
be destroyed / sensor does not
respond
Wrong connection
of ground / shield
Signal output is disturbed
The electronics can be damaged