Individual Unit, Clinical Bundle
User Manual mTrigger
™ Biofeedback System | V2-d4 | 06-01-21
Page 13 of 27
4)
Select "CONNECT" in the upper right corner of the Home screen.
5)
Locate the serial number on the sticker on the underside of the
mTrigger
device.
Match the serial number to the devices that appear in the scanned device list. Tap to
select your device number and connect via Bluet
ooth. A “device connected”
confirmation will pop up.
6)
At this point, the mobile app will enter calibration to ensure accurate data. The
calibration period takes 30-40 seconds. During calibration you may set up electrodes
(see below), access education and resources on setup, or adjust basic settings.
