MTR+ SineBravo, Operator'S Manual

Page: 46 / 64

SineBravo Bedienungsanleitung / Operators Manual
46
Additional Options for
Configuration of SineBravo
Additionally to the handling of pre-set programs as described in the previous chapter,
SineBravo
offers a great variety of possibilities to adapt the therapy-parameters according to
individual needs.
This concerns the pre-set programs that can vary in regard of the basic adjustments as well as
the 3 free customizable programs, in which the experienced therapist or user is able to create
completely new programs.
Configuration of Free Programs
Creating a new program is not difficult, because the programming always follows the same easy
scheme. The device leads in a loop to each parameter that can be chosen - indicated by flashing
bars.
1. Switch on SineBravo with the ON/OFF -button
2. Select PC1, PC2 or PC3 with the PRG -button.
3. Hold the SET -button in the battery-compartment pressed for 3-5 seconds. Then SineBravo
changes to programming mode and the bars beside the first parameter that can be set will flash.
4. In the following the right “+/-”buttons (channel B) are responsible for changing the
flashing parameter, while the left “+” button (channel A) is used to store the choice and
step forward to the next parameter. With the left “-”button it is possible to go one step back.
With the described scheme “right side changing / left side storing and step forward” all
necessary decisions can be met. If the first parameter is shown a second time, the configuration
is complete. Now the whole program can be stored with ESC . This configuration will stay
available until a new programming is done on this place or the whole device is reset to its
original state.