SineBravo Bedienungsanleitung / Operators Manual
32
1.
Dual Channel
2.
EMG Range: 0.2 to 2000 µV RMS (continuous)
3.
Sensitivity: 0.l µV RMS
4.
Selectable Bandpass filter - 3db Bandwidth,
a. Wide: 18 Hz +/- 4 Hz bis 370 Hz +/- 10 % - Reading below 235 microvolts
10 Hz +/- 3 Hz bis 370 Hz +/- 10 % - Reading above 235 microvolts
b. Narrow:
100 Hz +/- 5 Hz bis 370 Hz +/- 10 %
5.
Notch filter: 50 Hz - 33 dbs
6.
Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz
7.
Batteries: 4 x AA
8.
Work / Rest periods: 2-99 seconds
9.
Number of Trials: 2-99
10.
Measures of the device: L 141,6 mm / W 74 mm / H 40,4 mm
11.
Weight of the device: 270 g (incl. batteries)
Environmental conditions for storage & transportation:
0-93% atmospheric humidity, -25 to +70 degree centigrade.
Environmental conditions for use: 15-93% atmospheric humidity,
+5 to +40 degree centigrade, air pressure 700-1060 hPa.
The
SineBravo
is protected against debris larger than 12.5 mm in diameter from entering the
cabinet and is not water resistant and rated IP20.
Firmware version 3.0
Radio Link:
RF Frequency Range: 2.4000 GHz to 2.4835 GHz
RF Default Output Power: <= 1,0 mW
RF Maximum Output Power: <= 2,52 mW
Antenna Gain: 0 dBi
This device is quality controlled and fulfills the rules and regulations set by the German law for
medical products (MPG) as well as the guidelines of the European Community 93/42/EEC for
medical products. Therefore this device carries the CE-sign „CE 0123“. The serial number is on
the belt clip.
Manufacturer:
MTR+ Vertriebs GmbH,
Kamenzer Damm 78, 12249 Berlin - www.mtrplus.com
Technical Data
Summary of Contents for SineBravo
