![background image](http://html1.mh-extra.com/html/mthtrains/digital-command-system-wifi/digital-command-system-wifi_user-manual_1852049061.webp)
DCS WiFi DIGITAL COMMAND SYSTEM USER’S GUIDE
61
By attaching an 18 volt bulb to the output ports (red and black) of the TIU Output Channels
(Fixed or Variable) or onto the DCS Terminal Block input ports (red and black), the track
signal quality measurements will increase. The solution does not boost the signal it simply
cleans up signals reflected back into the TIU from the track. In effect, the solution eliminates
any “noise” caused by signals already present on the layout which lower the effectiveness of
any new signal produced by the TIU as commands are sent out.
Advanced Wiring
18V BULB TRACK SIGNAL IMPROVEMENT # 2
to center rail
to outside rail
to transformer power
or red
to transformer ground
or black
TERMINAL BLOCK
(M.T.H. Item # 50-1014)
to track
Summary of Contents for Digital Command System WIFI
