DCS WiFi DIGITAL COMMAND SYSTEM USER’S GUIDE
21
Quick Start: Command Mode
2. Tap the bezel to 0 SMPH and wait for the engine to come to a complete stop. Then tap the
new direction arrow and finally the desired speed.
If you slow the engine to 0 SMPH and then resume motion without tapping the new direction
arrow, the engine will remain in its current direction.
Basic Sounds
The Bell and Horn/Whistle icons operate the bell and the horn/whistle the same way in com-
mand mode that they do in conventional mode:
Horn/Whistle:
The horn/whistle will sound for as long as you depress the icon. It will stop
when you release the icon. The Proto-Sound 2.0 or later horn/whistle’s ending sounds are
designed to vary with the amount of time you hold the button.
Bell:
To sound the bell, tap Bell icon. To turn the bell off, tap the Bell icon again. The bell will
continue to ring from the time you turn it on until you press and release the icon again to turn
it off. When you turn it off, the bell sound effect fades out, ringing fainter until it stops, just
like a real bell.
Shut Down
1. To shut down the locomotive at the end of a session, stop the engine.
2. Tap the Shut Down icon to turn off the sound, smoke, and lights. The locomotive will play
a short series of realistic shutdown sounds before it falls silent. Repeat with all active engines.
Note that power is still on the track after shut down.
3. Close the DCS Application and turn off your transformer.
Summary of Contents for Digital Command System WIFI
