MTG
- 16 -
MPC Keypad v4.00
5: Using Speed Dials
Preset Mode Speed Dials
You can select any 9 Presets and assign them to be Speed Dials (favourites).
Once they are assigned, you can launch a Speed Dial from the Preset screen by
pressing and holding
CLEAR
and then tapping on one of the speed dial numbers
1 to 9
.
When you press and hold CLEAR, you will see
Speed Dial #?
As soon as you tap on the number key, the Preset you have assigned will be
fired off and the screen will reflect that you have sent that Preset:
MIDI Sending . . .
The new Preset will now become the active Preset and the LCD will reflect that:
A Speed Dial can contain any valid Preset number from 1 to 200. If the number is
out of range (say 0 or above 200), then the Speed Dial is considered “empty” and
you will see “
…
“ when you look at the value from the edit menu.
Assigning Speed Dials (on the keypad)
Speed Dials (favourites) as assigned using the Utility Menu or by sending Set
Parameter MIDI commands using System Exclusive.
See
Section 8: Utility Menu
on how to configure your keypad using the setup
menus.