EN - 6
There are three buttons ( , , ) on the KD58C display that represented by the following
functions respectively: MODE,
„+“
a
„
-
“
.
◆
Display description
◆
Switching the eBike On/Off
To switch on the eBike system, hold the MODE button for 2 s.
In the same way to hold the MODE button for 2 s again, the eBike system will be switched off.
When switching off the eBike system the leakage current is less than 1 uA.
When parking eBike for more than 10 minutes, the eBike system switches off automatically.
◆
Display Interface
After switching on the eBike system, the display shows Running Speed. On the condition of riding,
to change the indicated information, press MODE. to show in turn as below: Running Speed
(Km/h) → Trip Distance (Km) →Trip Time (Hour) → Average Speed (Km/h) → Max Speed (Km/h).
Each state will display for 2 seconds and then automatically returns to the Running Speed
interface. On the condition that the speed is 0 km/h, Total Distance will be added to the circulation
interface.
The circulation interface of the condition that the speed is 0 km/h
◆
Switching Push-assistance mode On/Off
To access the push-assistance mode, hold the button for 2 s, the
eBike will go on at a uniform speed of 6 Km/h
(3.7 mph)
, “P” is
showed on the screen at the same time. The push-assistance
function switches off as soon as you release the button.
Push-assistance function may only be used when pushing the eBike. Danger of injury when the wheels
of the eBike do not have ground contact while use the push-assistance function.
◆
Switching the Lighting On/Off
To switch on headlight of the eBike, hold the
button for 2 s. In the
same way to hold the button for 2 s again, the headlight will be
switched off.
If the front or rear light is not connected, the button can only be used to switch the display backlight
on / off.
