EN - 24
◆
“MAX PAS” Support level
Press the or (<0.5s
) button to highlight “Max Pass” in the Display settings
menu, and then
press (<0.5s) to select. Then with the or
button choose between “3/5/9” (the amount of
support levels). Once you have chosen your desired selection, press the (<0.5s) button to save
and exit to the "Display setting"
◆
“Power View” Setting the power
Press the or (<0.5s) button to high-
light “Power View” in the Display settings menu, and then
press (<0.5s) to select. Then with the or
button choose between “Power” or “Current”.
Once you have chosen your desired selection, press the (<0.5s) button to save and exit to the
"Display setting" interface.
Note: The displayed value of the motor power corresponds to its current load and in some cases the
peak motor power is displayed.
◆
“SOC View” Battery view in volt percent
Press the
or
(<0.5s
) button to highlight “SOC View” in the Display settings menu, and then
press
(<0.5s) to select. Then with the or
button choose between “percent” or “voltage“.
Once you have chosen your desired selection, press the (<0.5s) button to save and exit to the
"Display setting"
◆
“TRIP Reset” Reset mileage
Press the or (<0.5s) button to high-
light “TRIP Reset” in the Display settings menu, and then
press
(<0.5s) to select. Then with the or
button choose between “YES” or “NO”. Once you
have chosen your desired selection, press the (<0.5s) button to save and exit to the "Display
setting".
