SERIES 830 SELF PROPELLED
8
5.
REAR DOOR
5.1.
The lower end of the handle needs to be discon-
nected and moved out of the way to access the
screw with a 3/8 socket. See Figure 5.1.
5.2.
Once both of the screws are removed, carefully
move door toward front the of mower to relieve
tension on the springs.
5.3.
Inspect parts for damage or wear. Replace as
need. See Figure 5.3.
5.4.
When reinstalling spring in to rear door be sure
end is located properly. See Figure 5.4.
5.5.
Make certain the spring is in the proper position
in the handle assembly.
See Figure 5.5.
Figure 5.1
Handle
1/4-20 Screw
Figure 5.3
Rear door
Door torsion springs
Door pivot rod
Figure 5.4
Locating hole
Figure 5.5
Locating tab
