3. Installation
3. Installation
06
07
ENGLISH
ENGLISH
To install accessories
The three (3) included accessories (mirror, hook and magnet) are all attached to the camera in the
same way as illustrated below:
To connect Monitor power
Connect the monitor to an appropriate (100-240V ~ 50/60Hz) power source with the provided adap-
ter to charge and the charging icon will flash on the LCD screen. Turned off, the charge without any
prompt, but the monitor is charging.
To Install Monitor for Wired Use
IC-10 supports wired use by connecting the monitor to the camera handle.
To Insert SD Card
After SD card is inserted into SD card slot successfully,
an SD card icon will appear on the LCD screen;
otherwise, the ‘no SD card’ icon will show.
Aim at the cut of slot
SD Card
Click to lock up
Hook the hole
Wear the rubber ring
