background image

SAFETY PRECAUTIONS

3

  

For your own safety and that of your product, please make sure to follow the safety  precautions below. Failure to 

follow the instructions may result in serious injury,  property damage or death. Improper installation or operation will 

void the warranty.

PLEASE ENSURE THAT YOU READ, UNDERSTAND AND FOLLOW

ALL INSTRUCTIONS  KEEP THIS MANUAL FOR FUTURE REFERENCE

   DANGER

Risk of Accidental Drowning. Extreme caution must be exercised to prevent  unauthorized access by children.

Risk of drowning. Inspect the spa cover regularly for leaks, premature wear and  tear, damage or signs of 

deterioration. Never use a worn or damaged cover as it  will not provide the level of protection required to prevent 

unsupervised access to  the spa by a child.

Risk of drowning. Always lock the spa cover after each use.

Risk of injury. The suction fittings in this spa are sized to match the specific  water flow created by the pump. 

Never operate the spa if the suction fittings are  broken or missing. Never replace a suction fitting with an 

incompatible one.

Risk of injury. If the supply cord is damaged, it must be replaced by the  manufacturer, a service agent or a 

similarly qualified person in order to avoid hazards.

Risk of Electric Shock. Do not permit any electrical appliances, such as lights, telephones, radios or televisions, 

within 1.5m (5 feet) of a spa tub.

Risk of Electric Shock. Do not use the spa when it is raining, thundering or  lightning.

To reduce the risk of electric shock, do not use an extension cord, timers, plug  adaptors or converter plugs to 

connect the unit to the electrical supply; provide a  properly located outlet.

This appliance with its incorporated heating elements must be connected to a  grounded mains supply socket with 

a supply cord fitted with a plug and a PRCD (portable residual current device) with a tripping current of 10mA.

This appliance with earthing must only be plugged directly into an earthed socket-outlet for fixed wiring.

Parts containing live components, except those parts supplied with safety extra-low voltage not exceeding 12V, 

must be inaccessible to anyone using the spa.

Parts incorporating electrical components, except remote control devices, must be located or fixed so that they 

cannot fall into the spa.

Electrical installation should fulfill the local requirement or standards.

The wired controller must be properly stored in the side pocket when not in use,, to protect it from falling or other 

hazards.

To reduce risk or injury, keep children away from this product unless they are closely supervised at all times.

To reduce the risk of child drowning, supervise children all times. Children under 10 years should be under the 

active supervision of a person 16 years or older whilst in spa pool area. Attach and lock the spa cover after each 

use.

Make sure that the floor is able to support the expected load, which can be found on the specifications sheet. You 

will need to calculate the expected water capacity load plus the total weight.

   WARNING

Summary of Contents for F-MO061






















Reviews: