USER MANUAL
MCL100
Pág.
10
R
v0
7
Base
Washer
hex. bolt
hex. nut
Mounting on a levelled surface
5.2. MOUNTING ON A NON-LEVELLED SURFACE
The use of an adjustable wrench is required. A Phillips screwdriver is required to open the
flashlight and a small flathead screwdriver for wiring.
An adjustable span and a bubble level are required. The MCL100 can be mounted on a flat
surface which can resist 5 Kg minimum. Follow the next steps:
1.
Locate the hardware needed: 4 bolts, 4 safety nuts and 8 washers.
2.
Make 4 holes of 12mm diameter spaced 90º on a 200mm diameter. Hole template is
shown in Dimensions and Fixing Drawing.
3.
Mount the leveling hardware as shown in
¡Error! No se encuentra el origen de la
referencia.
.
4.
Check visually the leveling by adjusting the nuts as required.
5.
Level the lantern base by using a bubble level device in X direction.
6.
Check visually the leveling by adjusting the nuts as required.
7.
Level the lantern base by using a bubble level device in Y direction.
8.
Check visually the leveling by adjusting the nuts as required.
9.
Repeat steps 5 and 7 if required.
10.
Once the lantern is leveled, fix the upper nuts smoothly to fix the lantern.
Summary of Contents for MCL100
