85
RAID Configuration
3.
Reboot to Windows
®
; the rebuild will occur automatically.
Failed Hard Drive Member
1.
Power off.
2.
Replace the failed hard drive with a new one that is of equal or greater capacity.
3.
Reboot the system to IRST Option ROM by press
Ctrl + I
keys during the POST.
4.
Select the port of the destination disk for rebuilding, and then press
Enter
.
DISK / VOLUME INFORMATION
[ ]
4. Recovery Volume Options
4. Recovery Volume Options
5. Exit
RAID Volumes :
None defined.
Physical Devices :
Port Device Model Serial # Size Type/Status (Vol ID)
1 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
2 XXXX-XXXXXXXX XXXXXXXXXXXXXX XXX.XGB
Non-RAID Disk
[ ↑↓] - Select [ESC] - Exit [ENTER] - Select Menu
1. Create RAID Volume
2. Delete RAID Volume
“Degraded” volume and disk available for rebuilding detected. Selecting
a disk initiates a rebuild. Rebuild completes in the operating system.
[ ]
DEGRADED VOLUME DETECTED
Select the port of the destination disk for rebuilding (ESC to exit):
[ ↑↓] - Previous/ Next [ENTER] - Select [ESC] - Exit
Port Drive Model Serial #
Size
1 XXXX-XXXXXXXX
XXXXXXXXXXXXXX XXX.XGB
[ ]
MAIN MENU
5.
Exit IRST Option ROM, reboot to Windows
®
.
6.
When prompted to rebuild the RAID volume, click
Yes
.
7.
The
Intel
®
Rapid Storage Technology
application will be launched. Right-click
the new hard drive and select
Rebuild to this Disk
. The
Rebuild Wizard
will be
launched which will guide you through the process of rebuilding to the new hard
drive.
Summary of Contents for Z270 Gaming Pro Carbon Motherboard
