manualshive.com logo in svg

MSI X99A SLI PLUS, User Manual

Share
Download
MSI X99A SLI PLUS User Manual Download Page 106

Appendix B

B-12

Intel RAID

System Acceleration (optional)

Intel

®

 Rapid Storage Technology use a SSD as a cache. Which can store frequently 

used data without having to use a slow virtual disk or depend on RAM. The SSD 

cache  with the advantages of high-speed read/write and non-volatile memory to 

accelerate the system performance.

 Important

Check your SSD manufacturer's website, upgrade firmware in order to support Intel

® 

Rapid Storage Technology.

Intel

®

 Rapid Storage Technology can only work with RAID mode. Even though there is 

only one hard drive, you must set the SATA Mode to RAID in BIOS. The OS must be 

installed in the RAID ready disk in order to use the SSD caching.

Follow these steps to enable system acceleration. If Windows has been installed in 

RAID mode, skip to the step 5.

1.  Reboot and enter the BIOS steup.
2.  Set the SATA Mode to RAID in BIOS.

3. 

Install Windows operating system.

4.  Insert the MSI Driver DVD into the DVD-ROM drive.
5.  Install Intel

 

RAID driver

6. 

Powered off.

7.  Connect the SSD.
8.  Reboot the system to Windows.

Summary of Contents for X99A SLI PLUS













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands