MSI P55-GD65 series Technical Manual Download Page 74

Page: 74 / 150

A-2

Realtek Audo

▍

nStaLLing

the

eaLtek

hd a

udio

river

You need to nstall the HD audo drver for Realtek audo codec to functon properly

before you can get access to 2-, 4-, 6-, 8- channel or 7.1+2 channel audo operatons.

Follow the procedures descrbed below to nstall the drvers for dfferent operatng sys-

tems.

Installaton for Wndows

For Wndows

XP, you must nstall Wndows

XP Servce Pack3 or later before nstallng

the drver.

The followng llustratons are based on Wndows

XP envronment and could look

slghtly dfferent f you nstall the drvers n dfferent operatng systems.

Insert the applcaton DVD nto the DVD-ROM drve. The setup screen wll automat-

cally appear.
Clck Realtek HD Audo Drvers button.

Important

The HD Audo Configuraton software utlty s under contnuous update to enhance au-

do applcatons. Hence, the program screens shown here n ths secton may be slghtly

dfferent from the latest software utlty and shall be held for reference only.

Clck here

Summary of Contents for P55-GD65 series























































































































































Search results

Summary of Contents for P55-GD65 series

Reviews:

Brands by name

Popular brands

MSI P55-GD65 series, Technical Manual

Search results

Summary of Contents for P55-GD65 series

Reviews:

Brands by name

Popular brands