manualshive.com logo in svg

MSI P55-GD65 series, Technical Manual

Share
Download
MSI P55-GD65 series Technical Manual Download Page 135

JMcron RAID Introducton

▍

MS-7586

D-3

JMcron RAID Introducton

▍

MS-7586

JM

icron

 raid bioS u

tiLity

Be sure to set RAID mode for the JMcron 36x ATA Controller n BIOS before configur-

ng the JMcron BIOS utlty. After that, save the configuraton and ext. Durng boot up 

(POST), press CTRL+J to enter the JMcron BIOS RAID utlty.
The RAID Utlty menu screen wll be dsplayed. A bref descrpton of each secton s 

presented below.

Man Menu

Cerate RAID Dsk Drve - Create a new legacy RAID set.
Delete RAID Dsk Drve - Delete a legacy RAID set.
Revert HDD to Non-RAID - Revert an exsted-RAID HDD to non-RAID.
Solve Mrror Conflct - Sovle a mrror conflct.
Rebuld Mrror Drve - Rebuld data, when RAID 1 or RAID 10 data mrrorng s lost.
Save And Ext Setup - Save all settngs and ext the BIOS utlty.
Ext Wthout Savng - Ext the BIOS utlty wthout any savng.

Hard Dsk Drver Lst

The menu shows the model number and capactes of the drves physcally attached to 

the SATAII & PATA ports.

RAID Dsk Drver Lst

The menu shows the current configuraton of RAID set.

Summary of Contents for P55-GD65 series























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands